IntroductionIn our earlier articles on nagios we explained in detail how to install nagios core on the centos 6 system and configure it. In this article we will explain step by step how to monitor a remote machine with nagios core.Prerequisites:We will be installing the packages required for configuring nagios on a client machine using the EPEL repository therefore it must be enabled on the system. Please go through our article on how to enable the EPEL repository if you are unfamiliar about how to do so.Install NRPE and nagios pluginsNow we will install the nrpe package along with nagios plugins using yum.[ssuri@nagios-client:~] $ sudo yum install nrpe nagios-plugins-all
Loaded plugins: rhnplugin, security
This system is receiving updates from RHN Classic or RHN Satellite.
Setting up Install Process
————————————output truncated for brevity
Installed:
nagios-plugins-all.x86_64 0:2.2.1-4git.el6
Dependency Installed:
fping.x86_64 0:2.4b2-10.el6 lgtonmc.x86_64 0:9.2.1.2-1 lm_sensors.x86_64 0:3.1.1-17.el6
nagios-plugins.x86_64 0:2.2.1-4git.el6 nagios-plugins-breeze.x86_64 0:2.2.1-4git.el6 nagios-plugins-by_ssh.x86_64 0:2.2.1-4git.el6
nagios-plugins-cluster.x86_64 0:2.2.1-4git.el6 nagios-plugins-dhcp.x86_64 0:2.2.1-4git.el6 nagios-plugins-dig.x86_64 0:2.2.1-4git.el6
nagios-plugins-disk.x86_64 0:2.2.1-4git.el6 nagios-plugins-disk_smb.x86_64 0:2.2.1-4git.el6 nagios-plugins-dns.x86_64 0:2.2.1-4git.el6
nagios-plugins-dummy.x86_64 0:2.2.1-4git.el6 nagios-plugins-file_age.x86_64 0:2.2.1-4git.el6 nagios-plugins-flexlm.x86_64 0:2.2.1-4git.el6
nagios-plugins-fping.x86_64 0:2.2.1-4git.el6 nagios-plugins-game.x86_64 0:2.2.1-4git.el6 nagios-plugins-hpjd.x86_64 0:2.2.1-4git.el6
nagios-plugins-http.x86_64 0:2.2.1-4git.el6 nagios-plugins-icmp.x86_64 0:2.2.1-4git.el6 nagios-plugins-ide_smart.x86_64 0:2.2.1-4git.el6
nagios-plugins-ircd.x86_64 0:2.2.1-4git.el6 nagios-plugins-ldap.x86_64 0:2.2.1-4git.el6 nagios-plugins-load.x86_64 0:2.2.1-4git.el6
nagios-plugins-log.x86_64 0:2.2.1-4git.el6 nagios-plugins-mailq.x86_64 0:2.2.1-4git.el6 nagios-plugins-mrtg.x86_64 0:2.2.1-4git.el6
nagios-plugins-mrtgtraf.x86_64 0:2.2.1-4git.el6 nagios-plugins-mysql.x86_64 0:2.2.1-4git.el6 nagios-plugins-nagios.x86_64 0:2.2.1-4git.el6
nagios-plugins-nt.x86_64 0:2.2.1-4git.el6 nagios-plugins-ntp.x86_64 0:2.2.1-4git.el6 nagios-plugins-ntp-perl.x86_64 0:2.2.1-4git.el6
nagios-plugins-nwstat.x86_64 0:2.2.1-4git.el6 nagios-plugins-oracle.x86_64 0:2.2.1-4git.el6 nagios-plugins-overcr.x86_64 0:2.2.1-4git.el6
nagios-plugins-perl.x86_64 0:2.2.1-4git.el6 nagios-plugins-pgsql.x86_64 0:2.2.1-4git.el6 nagios-plugins-ping.x86_64 0:2.2.1-4git.el6
nagios-plugins-procs.x86_64 0:2.2.1-4git.el6 nagios-plugins-real.x86_64 0:2.2.1-4git.el6 nagios-plugins-rpc.x86_64 0:2.2.1-4git.el6
nagios-plugins-sensors.x86_64 0:2.2.1-4git.el6 nagios-plugins-smtp.x86_64 0:2.2.1-4git.el6 nagios-plugins-snmp.x86_64 0:2.2.1-4git.el6
nagios-plugins-ssh.x86_64 0:2.2.1-4git.el6 nagios-plugins-swap.x86_64 0:2.2.1-4git.el6 nagios-plugins-tcp.x86_64 0:2.2.1-4git.el6
nagios-plugins-time.x86_64 0:2.2.1-4git.el6 nagios-plugins-ups.x86_64 0:2.2.1-4git.el6 nagios-plugins-users.x86_64 0:2.2.1-4git.el6
nagios-plugins-wave.x86_64 0:2.2.1-4git.el6 qstat.x86_64 0:2.11-9.20080912svn311.el6Modify nrpe.cfg file:Now that we have installed nrpe we need to tell nrpe the IP address of our nagios server so that nrpe allows active checks from it. For this we modify the allowed_hosts directive in the nrpe.cfg file which is generally located at the path /etc/nagios/nrpe.cfg.[ssuri@nagios-client:~] $ grep allowed_hosts /etc/nagios/nrpe.cfg
allowed_hosts=127.0.0.1, 192.168.87.134
[ssuri@nagios-client:~] $Restart NRPE to put the change made in the nrpe.cfg file into effect and also enable the service to start on reboot.sudo systemctl start nrpe.service
sudo systemctl enable nrpe.serviceCreate a configuration file for the client on the nagios core server:On our Nagios server, we will create a new configuration file for the remote host on which we installed nrpe and nagios plugins. We are creating our host configuration file in the directory /nagiosap/objects/servers. You could create configuration files for the remote hosts that you would like to monitor in a directory of your choice. Just be sure to mention it in the nagios.cfg file so that nagios is aware of the locations. Add in the following host definition, replacing the host_name value with your remote hostname, the alias value with a description of the host and the address value with the private IP address of the remote host.We’ve named the file as nagios-client.cfg and added the below content in the file.define host {
use linux-server
host_name nagios-client
alias nagios-client Lab server
address 10.22.128.28
contact_groups admins
max_check_attempts 5
check_period 24×7
notification_interval 30
notification_period 24×7
}What we defined above is referred to as a host definition. With the configuration file above, Nagios will only monitor if the host is up or down. In order to monitor any service on the remote host we need to add service definitions. We’ve added service definitions for the ping and SSH service in our host configuration file.define service {
use generic-service
host_name nagios-client
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}
define service {
use generic-service
host_name nagios-client
service_description SSH
check_command check_ssh
notifications_enabled 0
}The value of check_command determines what will be monitored, including status threshold values. We will discus host and service definitions in greater detail in a separate article.After this reload the nagios service.sudo systemctl reload nagios.serviceNow we should be able to see the newly added node in nagios web interface. ConclusionThis concludes our discussion on how to add a host to be monitored by nagios. Please note that what we’ve shown here is a very basic client configuration setup. We would be discussing remote host monitoring in greater detail in future articles. Post Views: 1,888The following two tabs change content below.He started his career in IT in 2011 as a system administrator. He has since worked with HP-UX, Solaris and Linux operating systems along with exposure to high availability and virtualization solutions. He has a keen interest in shell, Python and Perl scripting and is learning the ropes on AWS cloud, DevOps tools, and methodologies. He enjoys sharing the knowledge he’s gained over the years with the rest of the community.
